科学・化成品分野の試料粉砕レポート検索

アプリケーションデータベース

粉砕試料
機器
Loading...
 

サンプルについての相談を承ります。

(3)

  • 試料の凍結前処理

    固体試料の化学分析等を行う際には、事前にその試料を前処理(粉砕、又はホモジナイズしなけ ればなりません。この粉砕工程で大切な事は、代表性の高い試料を作製する事と、その再現性です。この2 つが両立してこそ、はじめて正確な分析結果を得る事が可能となります。多くの場合、この 粉砕工程は(衝撃、圧力、摩擦、せん断、切断等の)一般的な粉砕方法により、常温で分析に必 要とされる粒度まで落とす事が出来ます。
  • White Paper: How to minimize standard deviations by correct sample preparation

    Modern analytical methods increase precision and push detection limits to make even the smallest traces of sample components detectable. Despite this development sample preparation, which is carried out prior to the actual analysis, is frequently neglected. Errors caused by lacking accuracy in sample preparation have a much bigger impact than errors made during analysis. Just like an iceberg which is mostly hidden under water, only a small part of the sum of errors is perceived whereas the major part of potential errors is not taken into account (fig. 1). One of the reasons may be the fact that sampling and sample preparation have always been done in a traditional way which has become a routine over the years and is no longer considered as having a critical influence on the subsequent analyses.
  • White Paper: Ultrafine Grinding with Laboratory Ball Mills

    How are nano particles produced? The “Bottom-Up” method synthesizes particles from atoms or molecules. The “Top-Down” method involves reducing the size of larger particles to nanoscale, for example with laboratory mills. Due to their significantly enlarged surface in relation to the volume, small particles are drawn to each other by their electrostatic charges. Nano particles are produced by colloidal grinding which involves dispersion of the particles in liquid to neutralize the surface charges. Both water and alcohol can be used as dispersion medium, depending on the sample material. Factors such as energy input and size reduction principle make ball mills the best choice for the production of nanoparticles.

情報誌 "the sample" (2)

  • No. 38

    「フェルダー・サイエンティフィック・ディビジョン」のご紹介
  • No. 38

    DIE VERDER SCIENTIFIC DIVISION STELLT SICH VOR

アプリケーションレポート (36)

  • エアジェットシーブAS200ジェットを使った凝集粉末の分級

    エアジェットシーブは、40μm以下の非常に細かい粉体の乾式分級に広く用いられています。また、振動式のふるい振とう機に比べて極めて短時間で分級ができるので、250μmまでの粉体にも広く採用されています。
  • カッティングミルSM300伝統からの革新

    カッティングミルは試料調製に広く使われている粉砕機です。二次燃料の粉砕、再生可能な
    バイオマスの研究開発、WEEE/RoHS対応の成分分析および有価金属の回収など、その
    アプリケーションは多岐にわたります。
  • クライオミルを使った揮発性物質を含んだ試料の粉砕

    試料調製の際に、常温での粉砕よりも凍結粉砕機を使ったほうが適している場合がありま
    す。液体窒素で凍結された試料は脆化されるので、衝撃・摩擦などで粉砕されやすくなり
    ます。さらに、試料中の揮発性物質も保持できます。
    レッチェのクライオミルは、最新の安全な凍結粉砕機で優れた粉砕結果をお約束します。
  • プラスチック - その多様性

    プラスチックは種類が豊富な分、その使用用 途も多岐に渡ります。PE、PET、PC、PP、PBTやABSの様な略称 は単に材質そのものを示すだけではなく、そ の中に多くの性質を持つものが含まれていま す。使用目的に応じ、プラスチックは耐衝撃 性、堅牢性、耐熱性、耐溶媒性などの性質が 求められます。
  • 注目される資源の再生

    植物の代表サンプル作成には経験が必要 切迫した原料不足を背景に産業界は、再生可能な資源の利用技術開発に注力しています。その中でも様々な植物は繊維、顔料、医薬品、燃料、油脂および緩衝材の原料として脚光を浴びています。しかし、植物はその複雑な組成や成分のため、分析用の試料調製が困難なもののひとつです。予備粉砕から微粉砕までの最適な粉砕方法を見つけ出すのは簡単なことではなく、経験とノウハウが必要です。
  • 玩具中の重金属分析

    玩具は安全でなければなりません。これは玩具中のヒ素、鉛、カドミウム、およびアンチモンの様な物質の最大許容値を定めたEU指令88/378/EWGに明確に記載されており、含有量は子供に害があると推定されるレベル以下でなければいけません。最近では、玩具から基準値を上回る重金属が検出された事例がメディアを賑わせているため、消費者の安全への関心も高まっています。そのため、玩具メーカーにとっては、信頼性のある品質管理によって製品の無害を立証することが重要な課題となっています。
  • 環境負荷物質の検出(RoHS/WEEE)

    電子部品廃棄物の試料調製 ラジコンカーの分析用試料調製の方法を説明しています。  プラスチックの顔料に含まれるカドミウム、ハンダ中の鉛、ケーブルの難燃材に含まれるPBBなど、電子部品の中には有害物質が含まれている可能性が数多くあります。EUの有害物質規制に関する指令(WEEE/RoHS)が2006年7月に発令されて以来、機器メーカー、部品メーカー、材料メーカー、およびリサイクル業者は、その対応に迫られています。
  • 蛍光X線分析用の試料調製

    蛍光X線分析は質量分析に広く使われている分析方法ですが、試料調製が正しく行われないと正確で再現性の高い分析結果が得られません。
  • La Fragmentación

    Por lo general se asocia a la noción "fragmentación", el machacamiento, de sustancias sólidas mediante fuerza mecánica. Pero también la división de líquidos en gotas o de gases en bollas representa un proceso de fragmentación.
  • La nueva generación de molinas planetarios de bolas

    Los más precisos resultados de trituración en el más breve tiempo se consiguen con los nuevos molinos planetarios de bolas, de Retsch. Con el PM100 y el PM200, Retsch presenta una nueva generación de molinos planetarios de bolas con uno o dos unidades de trituración, que establecen nuevos estándares de rendimiento en este segmento de la producción.
  • Los especial del pigmento

    Debido a la ilimitada variedad de colores y texturas que ofrencen los recubrimientos en polvo; muchos de los nuevos recubrimientosde aplicación especifica se crean en el laboratorio en pequeñas cantidades que luego se le envían al cliente para su aplicación y aprobación.
  • Molienda ultrarrápida y ultrafina

    El nuevo molino ultracentrífugo ZM 200 de RETSCH es un molino de rotor no sólo extremadamente rápido y cuidadoso con el material molido, sino también de uso universal gracias a su amplia gama de accesorios.
  • Eiskalt Zerkleinert

    Die meisten Probenmaterialien lassen sich durch die Wahl des geeigneten Zerkleinerungsgerätes problemlos mahlen. Die Beanspruchungsmechanismen wie Prall, Druck, Scherung, Schneiden, Reibung reichen bei Raumtemperatur aus, um das Material auf die benötigte Partikelgröße zu zerkleinern. Was aber kann man tun, wenn die mechanische Beanspruchung allein nicht ausreicht, um das Probenmaterial in möglichst kleine Partikel zu überführen? Eine Lösung dieser Problematik bietet der Einsatz von Flüssigstickstoff, der das Bruchverhalten solcher Materialien begünstigt.
  • Kolloidvermahlungen zur Erzeugung von Nanopartikeln

    Nanoteilchen, d.h. Partikel mit einem Durchmesser von weniger als 100 Nanometer, werden seit vielen Jahren von Wissenschaftlern erforscht. Zum einen lassen sie sich im „Bottom-up“ Verfahren aus Atomen oder Molekülen synthetisieren. Im “Top-Down“ Verfahren hingegen werden größere Partikel, z.B. mit Hilfe von Labormühlen, zerkleinert. Kleine Partikel weisen durch das extrem vergrößerte Verhältnis von Oberfläche zu Volumen erhöhte Oberflächenladungen auf, so dass die Partikel elektrostatisch zueinander gezogen werden. Daher können Nanopartikel nur durch Nassvermahlung (Kolloidvermahlung) erzeugt werden.
  • Outdoorbekleidung: Natur pur oder dem Gift auf der Spur?

    Freizeitaktivitäten in der Natur wie Wandern, Radfahren oder Klettern erfreuen sich großer Beliebtheit. Die Textilindustrie bietet hierfür eine große Bandbreite an Funktionskleidung aus synthetischen High-Tech Materialien, die in der Regel wind- und wasserfest sind sowie atmungsaktiv. Wie Greenpeace in einer Studie von 2013[1] nachweisen konnte, finden sich in wetterfesten Textilien immer wieder Gefahrstoffe wie per-oder polyfluorierte Chemikalien (PFC), welche z. B. zum Schutz vor Wasser und Schmutz in die Kleidung eingearbeitet werden.
  • Probenvorbereitung für die Analyse von PET Verpackungen

    PET Flaschen sind als leichte und stabile Getränkeverpackung beliebt und weit verbreitet. Mineralwasser und andere Getränke in diesen Flaschen können jedoch Spuren der gesundheitsschädlichen Verbindung Acetaldehyd enthalten. Der Stoff wirkt sich schon in geringen Spuren negativ auf die Geschmacksqualität aus. Zur Qualitätssicherung sind daher für Verpackungshersteller und Getränkeabfüller aufwändige quantitative Prüfverfahren erforderlich. Da Acetaldehyd eine leicht flüchtige Verbindung ist, muss eine thermische Belastung der PET Probe im Vorfeld der Analyse in jedem Fall verhindert werden. Die Kryogenvermahlung bei -196 °C ist eine Methode zur schonenden, reproduzierbaren Zerkleinerung elastischer Materialien. Das Verfahren eignet sich für die Probenvorbereitung im Rahmen chromatographischer Routinekontrollen im zertifizierten Prüflabor.
  • Schnell und schonend zerkleinern

    In zahlreichen Labors werden täglich viele unterschiedliche Probenmaterialien aufbereitet. Für die Zerkleinerung von Feststoffproben auf Analysenfeinheit wird eine Mühle benötigt, die nicht nur vielseitig einsetzbar und leicht zu reinigen ist, sondern die auch eine reproduzierbare Probenvorbereitung – und damit zuverlässige Analysenergebnisse - garantiert.
    Mit der Ultra-Zentrifugalmühle ZM 200 bietet RETSCH eine Rotormühle an, die nicht nur sehr schnell, sondern auch äußerst materialschonend zerkleinert und, dank einer umfangreichen Zubehörpalette, universell einsetzbar ist. Mit ihrem kraftvollen Powerdrive-Antrieb vermahlt die ZM 200 weiche bis mittelharte und faserige Materialien extrem schnell auf Endfeinheiten bis unter 100 µm und steigert so den Probendurchsatz im Labor.
  • Sample preparation of PET preforms for subsequent analytics

    In the beverage industry plastic bottles – or rather their performs - are analyzed for their acetaldehyde content to prevent any health risk for consumers. The acetaldehyde must be extracted from the preforms prior to analysis. To ensure correct results, the bottles first have to be crushed and homogenized by laboratory mills. Care must be taken that the volatile substance acetaldehyde does not escape during the process due to heat build-up inside the grinding chamber. To preserve the acetaldehyde, part of the sample preparation is carried out under cryogenic conditions.
  • Emax - faster, finer, cooler

    The biggest challenge when developing a high energy ball mill is controlling the temperature. The very high energy produced by ball milling leads to an extreme heat increase inside the grinding jars. RETSCH solved this problem by creating an innovative integrated water-cooling system. Grinding breaks for cooling, which are unavoidable in conventional ball mills even after only 30 minutes grinding at moderate speed, are usually not necessary when using the High Energy Ball Mill Emax.
  • Toxic substances in our daily life

    Plastic is an inherent part of our everyday lives; it is used in a huge variety of things such as, for example, packaging, furniture, clothing or electronic devices. Though the utility of the material is undoubted, consumers are increasingly unsettled by recurring news about hazardous substances detected in plastics.
    Substances such as plasticizers, which are not firmly bound in the material, are absorbed via the skin and can influence the hormonal balance. Plasticizers contained in food packaging, for example, penetrate into the food and thus into the human body when the food is eaten. Plasticizers in toys are a particularly serious problem; children tend to take toys into their mouths thus absorbing the dangerous chemicals.  Equally hazardous are polycyclic aromatic hydrocarbons (PAH). The family of PAH comprises more than 100 compounds most of which have been found to be carcinogenic.
  • Emax - The Revolution in Ultrafine Grinding

    The Emax is an entirely new type of ball mill which was specifically designed by RETSCH for high energy milling. The impressive speed of 2,000 min-1, so far unrivaled in a ball mill, in combination with the special grinding jar design generates a vast amount of size reduction energy. The unique combination of impact, friction and circulating grinding jar movement results in ultrafine particle sizes in the shortest amount of time. Thanks to the new liquid cooling system, excess thermal energy is quickly discharged preventing both sample and mill from overheating, even after long grinding times.
  • Outdoor clothing: Pure nature or traces of poison?

    Outdoor activities such as hiking, biking or climbing are very popular. As a result, the textile industry offers a huge variety of functional outdoor clothing made from synthetic high-tech materials which are wind- and waterproof as well as breathable. In 2013 Greenpeace published a study proving that hazardous substances such as perfluorinated and polyfluorinated chemicals (PFC) were used in weatherproof clothing as protection against water or dirt. This article describes the sample preparation process with cutting mills and cryogenic mills of high-tech fibres.
  • White Paper: Representative Analysis Results Require Adequate Sample Preparation

    A faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Rotating dividers and rotary tube dividers are an important means to ensure the representativeness of a sample and thus the reproducibility of the analysis. Correct sample handling consequently minimizes the probability of a production stop due to incorrect analysis results. Thus correct sample handling is the key to effective quality control.
  • CryoMill - Cryogenic grinding was never more convenient or efficient

    Some sample materials have properties which make size reduction at ambient temperature impossible. If, for example, very elastic materials need to be ground or volatile components have to be preserved for further analysis, it is essential to carry out cryogenic grinding. The use of liquid nitrogen helps to embrittle the sample, thus improving its breaking properties, and preventing volatile substances from escaping due to the frictional heat produced by the grinding process.
  • Secondary fuels – Energy for the cement industry

    Due to decreasing resources and increasing market prices for primary fuels like oil, gas or coal, it is paramount for the cement industry to search for alternative energy sources. With regard to the CO2 emissions trading, a switch to energy sources which have a neutral CO2 balance can be rather profitable. Usually, these are non-fossil fuels. Industries with high energy consumption have made increasing use of alternative fuels during the last years. Accordingly, the use of so called secondary fuels (also waste derived fuels/wdf or refuse derived fuels/rdf) has gained importance. These are mostly combustible fractions of domestic or industrial waste which cannot be recycled.
  • Powerful Cutting Mill

    The SM 300 excels especially in the tough jobs where other cutting mills fail. It has a freely selectable speed range from 700 to 3,000 rpm with high torque. The mill is convenient to operate and easy to clean. Reliable and extremely efficient sample preparation in the laboratory is now guaranteed with the SM 300.
  • Preparation of Elastic Plastics for the Detection of PAH

    Polycyclic aromatic hydrocarbons, short PAH, are usually a by-product of combustion and can be found, for example, in cigarette smoke or oil-based products. Mineral oil containing PAH is often used in rubber products as plasticizer, especially in black-coloured products such as car tyres, rubber grips of tools or rubber shoe soles. It was discovered that some polycyclic aromatic hydrocarbons are carcinogenic, so that maximum permissible values have been determined for the concentration of PAH in consumer products.
  • Size reduction of elastic plastics with volatile components

    Neutral-to-analysis sample preparation for the detection of PAH and phthalates
  • Sick with Dolls

    Traces of Heavy Metals in Toys
  • Green Chemistry in the Lab

    Mechanochemistry is a very effective method to carry out syntheses without solvents and by-products. The technical literature describes a great number of reactions where a conversion of 100% is achieved. A precondition for the establishment of mechanochemistry in the industrial sector is the availability of suitable laboratory mills. A decisive factor is that – similar to conventional preparative chemistry – ambient parameters such as pressure and temperature can be documented and monitored. The Planetary Ball Mills and Mixer Mills from Retsch fulfill these requirements.
  • Sample Preparation of Electronic Scrap in the Context of RoHS and WEEE

    Since August 2004 new EU directives for the disposal of used electrical and electronic appliances as well as the restricted use of certain hazardous substances in these devices have become effective.
  • Sample Preparation of Plastics for X-Ray-Fluorescence Analysis

    The elemental analysis of plastics has become more and more important. EC directive 91/338/EWG regulates the ban of cadmium in PVC, EC directive 94/62/EC defines limits for cadmium, lead, chromium and mercury in packing materials and EC directive 2000/53/EC defines limits for the same elements in end-of-life vehicles. This has created a strong need for a rapid and reliable testing method.
  • Analysis of cadmium in plastics

    In recent years, mass media have focused on the topics of the environment and environmental conservation. With the advancement in scientific technology, resource development has progressed.
  • Representative results require adequate sample preparation

    The following situation is typical for many production plants: After a routine quality check, the production process is stopped or an already produced batch is suspended, because the analysis results were not within the relevant critical values. But does the tested product really deviate from the specifications? The quality control managers are convinced of this because modern analysis instruments provide results with very low tolerances. The sample in question was tested several times and the result was confirmed. The question is why the product does not match the specifications although the production parameters have not been changed in any way.
    The possibility that the tested product is indeed deficient cannot be excluded. However, it is often not the product itself which causes irregular analysis results but a lack of understanding of the steps which come before the analysis.
  • Air Jet Sieving of Bulk Materials

    Particle size analysis and particle size distribution are important criteria for the quality  control of bulk materials. In a running production process, the results of a quality check must be available quickly to allow for immediate adjustment of the production parameters. Depending on the expected particle size and sample volume, different sieving methods and sieving machines are suitable for analysis. The method used for particle size analysis is primarily determined by the fineness of the material to be sieved. For dry sieving of samples with particle sizes below 40 microns, air jet sieving is the method of choice.

使用事例 (5)

テストレポート (132)